25′ Copper Immersion Wort Chiller. Made from 3/8″ OD thick wall copper tubing. About 10″ in diameter. Chill down your wort quickly to minimize risk of bacterial infections.
AIH has this on sale for just $35.99
Stacks With Free Shipping! Adventures in Homebrewing is offering free shipping on most orders of $55 or more with a few exclusions.
An easy filler item if you need help qualifying for free shipping… 4 lbs of PBW (a good deal at $23.99)
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
I’m excited to announce that Keg Connection has picked up ExChilerator Chillers. As of this posting they are carrying both MAXX and Brutus models.
More Info - About the Pictured ExChilerator MAXX
From the product description, check product page for current description, price and availability:
Made with the serious homebrewer in mind, this counterflow wort chiller is the baddest of the bad (and by bad, we mean good). 25 feet of counterflow awesomeness make up this top-of-the-line chiller that includes a thermometer so you can watch your wort drop over 100 degrees in just a few minutes!
Ice baths can take forever and waste precious time that leaves your wort exposed to outside bacteria, yeast, and other bugs (even with the kettle lid on). This lengthy period can also leave proteins, hop material, and tannins immersed in your wort, which clouds your finished product and can potentially leave fusel alcohol, DMS, and sulfur. Achieving a good cold break is vital for yeast health and beer clarity, because the rapid change in temperature makes these proteins and other undesirables coagulate and flocculate to the bottom of your kettle.
Make the upgrade to the ExChilerator, and watch your boiling or near-boiling wort magically go from 200ºF+ to 80ºF or below in just minutes. You’ll see a rapid increase in clarity and flavor in your homebrew!
* This item is shipped directly from the manufacturer, so please allow a few extra days for processing.
General Info
25′ copper counterflow coil
Includes thermometer
One roll 1/2″ teflon tape
One ½ SS 304 Tee
One ½ SS 304 2 Piece ball valve
One ½ SS 304 close nipple
One ½ x ¾ Brass garden hose connection
One ½ x ¾ Brass swivel garden hose connection
Four ¼ Self tapping screws
Two Mounting brackets already installed
HBF Readers Save More! Coupon code HBF5OFF saves you 5% off EVERYTHING site wide. Stacks with all non-coupon sales
$7.95 shipping: Shipping is just $7.95, no matter how much you order, to addresses in the contiguous US.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
★Powerful Speed Flow: Max Flow Rate: 580 GPH per hour, Max Lift Height: up to 6 Feet.(The length of power cord:5 ft)
★Ultra Quiet：This water pump is designed for reliability and ultra-quiet operation to provide years of service，energy-saving and low power consumption.(Power: 35 W,Voltage: 110V)
★Perfect size: This profile size water pump is great to hide or disguise (Dimensions: 5.7″(H)*5.9″(L)*3.34″(W)).With no seals or messy oils ,the suction cups mounting feet for either vertical or horizontal mounting.[ONLY for INDOOR application].
★3 Outlet Adapters: Equipped with 3 Outlet Adapters ,one is 0.51inch, one is 0.6inch, and the other is 0.7inch, providing a different water flow as you desired.This submersible pump is ideal for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond.
★Detachable and Cleanable:The water pump is easy to detach to clean. [NOTE: pump metric threaded fit for vinyl tubing, need a 13mm metric to 0.5″ NPT Adapter to fit for standard 1/2″ threaded PVC fitting]
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
KEDSUM Submersible Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
ZChillers are made in the US by Packless Industries located in Waco, Texas.
ZChillers are double tube counter flow wort chillers. The interior tubing is a Spiral Star Design. This spiraling increases the surface area of copper that’s in contact with your wort. It also increases turbulence. More movement across more surface area means your wort chills quickly.
from AIH: “The ZChiller utilizes the enhanced thermal gradients of a counterflow wort chiller with the added benefit of greater surface area for heat transfer. Instead of a simple, cylindrical inner tube, the ZChiller utilizes a unique, convoluted “spiral star†design that enables superior heat transfer out of the wort as well as unparalleled cooling uniformity for consistent cold breaks and record cooling times. The chilling ability matches or exceeds that of plate chillers without the downside of disruptive clogs.”
These advantages result in:
Reduced chilling time.
More efficient cold break to remove unwanted proteins and particulates from your beer.
Cleaner aroma profile because of decrease in DMS production, giving you a more pronounced aroma that you have worked so hard for.
Easier cleaning, especially when compared to a plate chiller.
This is selling for $189.99
Save $20: Adventures in Homebrewing is offering up to $30 off your purchase, depending on your order total. Get $10 off $80, $20 off $160 and $30 off $240. No coupon code is required, the discounted amount should be automatically be reflected in your cart before checkout. Nearly everything qualifies including existing sale items, although their are a few exceptions. See terms and conditions.
Get Free Shipping! Adventures in Homebrewing is offering free shipping on most orders of $55 or more to addresses in the contiguous US.
Check sale or product page for current availability & pricing
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
aih
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:zchillers tag:brewmore
From the product description, check product page for current description, price and availability:
Plate heat exchangers are one of the fastest ways to cool your wort and the 20 plate Chillout is one of the best and most affordable options. The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples along each plate that create more surface area to improve heat transfer. A great addition to your brewing setup.
Set up one side with Wort in & out, and Water in & out on the other side. Either way works.
Features:
Made from stainless steel and copper
Has rippled plates for more surface area
Barbs are 1/2 in. (Hose clamps recommended!)
Dimensions: 12.4″ L x 2.9″ W x 2″ H
Limited Availability Deal of the Day: As of this posting, this is marked down to $64.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.
Product Description – Here– Use coupon code BEERDEAL to get this discount.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
★Powerful Speed Flow: Max Flow Rate: 580 GPH per hour, Max Lift Height: up to 6 Feet.(The length of power cord:5 ft)
★Ultra Quiet：This water pump is designed for reliability and ultra-quiet operation to provide years of service，energy-saving and low power consumption.(Power: 35 W,Voltage: 110V)
★Perfect size: This profile size water pump is great to hide or disguise (Dimensions: 5.7″(H)*5.9″(L)*3.34″(W)).With no seals or messy oils ,the suction cups mounting feet for either vertical or horizontal mounting.[ONLY for INDOOR application].
★3 Outlet Adapters: Equipped with 3 Outlet Adapters ,one is 0.51inch, one is 0.6inch, and the other is 0.7inch, providing a different water flow as you desired.This submersible pump is ideal for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond.
★Detachable and Cleanable:The water pump is easy to detach to clean. [NOTE: pump metric threaded fit for vinyl tubing, need a 13mm metric to 0.5″ NPT Adapter to fit for standard 1/2″ threaded PVC fitting]
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
KEDSUM Submersible Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
From the product description, check product page for current description, price and availability:
304 Stainless Steel Plates with 99.9+% Copper Brazing
Good Performance Economy Heat Exchanger
Recommended Max Water Flow Rate: 15.5 gpm, Design Temperature: -195°C to +220°C (-319°F to 430°F)
What are other people saying? Search this product’s reviews for “wort” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
400 GPH Submersible Water Pumps for Aquarium, Tabletop Fountains, Pond, Water Gardens and Hydroponic Systems with Two Nozzles, CE-ROHS Approved, 5.9 ft Power Cord
More Info
From the product description, check product page for current description, price and availability:
An adjustable Knob to control the water flow rate, it can elevate column of water up to 6.5ft (2m), the maximum flow rate is 1.5(m3/h).
Four strong suction cups at the bottom of the pump are great for mounting on where both vertically and horizontally.The reliable and durable motor produce low-noise, giving you quiet environment.
Equipped with two nozzles (0.51in and 0.62in), providing different water flow effects, ideal for a medium-sized aquariums, small ponds, desktop water fountains, etc.
The small profile size makes it not only easy to hide or disguise but convenient to separate and clean, therefore no need any tools to detach it.
AC 110-120V/6 Hz/ 25 Watts, 1P X 8/ Hmax 2m and Qmax 1500 L/H /SL 430-B
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Icemaster 100 Glycol Chiller with Stainless Bulkheads via MoreBeer
More Info
From the product description, check product page for current description, price and availability:
The Icemaster is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our Glycol Pump Kits. Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don’t have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one Icemaster and four Glycol Pump Kits (GLY355).
Compatibility
The Icemaster can be used with any fermenter that has a built in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters.
Ss Brewtech Fermenters and Briteswith optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package – Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
SpeidelTanks with Optional Cooling Jackets – You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters – Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for eash fermenter
Blichmann Fermenators with Optional Cooling Coil – You will need one Glycol Pump Kit for each Fermenator.
It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75 degree ambient and neoprene insulation. Neoprene does not provide much in the way insulation so you would obtain better results using Armaflex or a higher R rating insulation. If only controlling fermentation temps the capacity would be higher. Four Glycol Pump Kits (GLY355) is the maximum that will fit in the Icemaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the Icemaster right now has the capacity to use 5 pumps through the bulkhead fittings.
Cold Crashing capacity at 75F with neoprene insulation (double for fermentation temperature control):
2 – 1BBL (31 Gallon) Tank with neo
3 to 4 – 1/2BBL (15-20 Gallon) Tanks
4+ – 10-14 Gallon Tanks
4+ – 5-7 Gallon Tanks
As of this posting, MoreBeer has this for $749.99.
ANOTHER 10% Off! For a short time, MoreBeer is taking 10% off nearly everything as part of a sitewide sale
Check sale or product page for current availability & pricing
Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
pinned
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Powerful Speed Flow: Max Flow Rate: 800 GPH per hour(3000L/H), Max Lift Height: up to 10 Feet.6 ft UL certification power cord with grounded three-pronged plug keep safe.
Ultra Quiet: This water pump is designed for reliability and ultra-quiet operation to provide years of service, energy-saving and low power consumption.(Power: 60 W, Voltage: 110V)
Triangle Design: Latest unique beautiful triangle design, 360 degree triangle water intake grid, strong filtration, not easily to get clogged, easy cleaning and maintenance.
3 Outlet Adapters: Equipped with 3 Outlet Adapters ,one is 1/2inch，one is 5/8inch ,and the other is 3/4inch, providing a different water flow as you desired. This submersible pump is ideal for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond.
Detachable and Cleanable: The submersible pump is easy to detach to clean. [NOTE: This water pump is metric threads. Pump metric threaded fit for vinyl tubing, need a 13mm metric to 0.5″ NPT Adapter to fit for standard 1/2″ threaded PVC fitting.] KEDSUM provide 1 year manufactured warranty for all submersible water pump. Any question of the pump, pls send email us at support@kedsum.com
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
KEDSUM Submersible Water Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Homasy 400GPH Submersible Pump 25W Fountain Water Pump with 5.9ft Power Cord
More Info
From the product description, check product page for current description, price and availability:
WATER FLOW CONTROL. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400GPH.
STRONG POWER and HIGH LIFT. 25W high efficiency motor for energy saving. Max Lift Height: 6.9ft.(Make sure to connect a water pipe to the smallest nozzle , make sure the joint sealed securely and tightly).
ULTRA QUIET DESIGN with 2 NOZZLES (0.51in and 0.62in). High quality motor provides a quiet environment for you. Threaded fittings make it more stable. The impeller shaft is stainless steel for long life span and corrosion resistance.
SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
WIDE APPLICATION. Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc. Backed by professional after-sale service within 24hrs
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
What are Other’s Saying? Search this product’s Amazon reviews for “beer” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
ZChillers are made in the US by Packless Industries located in Waco, Texas.
ZChillers are double tube counter flow wort chillers. The interior tubing is a Spiral Star Design. This spiraling increases the surface area of copper that’s in contact with your wort. It also increases turbulence. More movement across more surface area means your wort chills quickly.
from AIH: “The ZChiller utilizes the enhanced thermal gradients of a counterflow wort chiller with the added benefit of greater surface area for heat transfer. Instead of a simple, cylindrical inner tube, the ZChiller utilizes a unique, convoluted “spiral star†design that enables superior heat transfer out of the wort as well as unparalleled cooling uniformity for consistent cold breaks and record cooling times. The chilling ability matches or exceeds that of plate chillers without the downside of disruptive clogs.”
These advantages result in:
Reduced chilling time.
More efficient cold break to remove unwanted proteins and particulates from your beer.
Cleaner aroma profile because of decrease in DMS production, giving you a more pronounced aroma that you have worked so hard for.
Easier cleaning, especially when compared to a plate chiller.
This is selling for $189.99
Save $20: Adventures in Homebrewing is offering up to $30 off your purchase, depending on your order total. Get $10 off $80, $20 off $160 and $30 off $240. No coupon code is required, the discounted amount should be automatically be reflected in your cart before checkout. Nearly everything qualifies including existing sale items, although their are a few exceptions. See terms and conditions.
Get Free Shipping! Adventures in Homebrewing is offering free shipping on most orders of $55 or more to addresses in the contiguous US.
Check sale or product page for current availability & pricing
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
aih
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:zchillers tag:brewmore
400 GPH Submersible Water Pumps for Aquarium, Tabletop Fountains, Pond, Water Gardens and Hydroponic Systems with Two Nozzles, CE-ROHS Approved, 5.9 ft Power Cord
More Info
From the product description, check product page for current description, price and availability:
An adjustable Knob to control the water flow rate, it can elevate column of water up to 6.5ft (2m), the maximum flow rate is 1.5(m3/h).
Four strong suction cups at the bottom of the pump are great for mounting on where both vertically and horizontally.The reliable and durable motor produce low-noise, giving you quiet environment.
Equipped with two nozzles (0.51in and 0.62in), providing different water flow effects, ideal for a medium-sized aquariums, small ponds, desktop water fountains, etc.
The small profile size makes it not only easy to hide or disguise but convenient to separate and clean, therefore no need any tools to detach it.
AC 110-120V/6 Hz/ 25 Watts, 1P X 8/ Hmax 2m and Qmax 1500 L/H /SL 430-B
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
From the product description, check product page for current description, price and availability:
Powerful Speed Flow: Max Flow Rate: 800 GPH per hour(3000L/H), Max Lift Height: up to 10 Feet.6 ft UL certification power cord with grounded three-pronged plug keep safe.
Ultra Quiet: This water pump is designed for reliability and ultra-quiet operation to provide years of service, energy-saving and low power consumption.(Power: 60 W, Voltage: 110V)
Triangle Design: Latest unique beautiful triangle design, 360 degree triangle water intake grid, strong filtration, not easily to get clogged, easy cleaning and maintenance.
3 Outlet Adapters: Equipped with 3 Outlet Adapters ,one is 1/2inch，one is 5/8inch ,and the other is 3/4inch, providing a different water flow as you desired. This submersible pump is ideal for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond.
Detachable and Cleanable: The submersible pump is easy to detach to clean. [NOTE: This water pump is metric threads. Pump metric threaded fit for vinyl tubing, need a 13mm metric to 0.5″ NPT Adapter to fit for standard 1/2″ threaded PVC fitting.] KEDSUM provide 1 year manufactured warranty for all submersible water pump. Any question of the pump, pls send email us at support@kedsum.com
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
KEDSUM Submersible Water Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
PROVIDE YOU COMFORT & QUIET ENVIROMENT--Our fountain pump’s ultra-quiet operation will let you feel that the sounds of the water pouring out of your fountain is such a relaxing and tranquil sound, and you will love sitting out on your patio watching the squirrels and birds bath and now the peaceful sounds of our fountain make it even more enjoyable.
MULTI-OCCASIONS--The fountain pump can make circulation to your tank and give your lovely fish a near-natural environment. This submersible water pump can create water current, ideal for a medium-sized aquarium, small pond, water garden, and desktop water fountains. Perfect for backyard fountain/waterfall, aquarium, ponds, fish tank, tabletop fountains, garden statuary, patio drip irrigation system and hydroponic systems and more.
ADJUSTABLE--The fountain pump is designed with an adjusting knob, allowing to get just the amount of water pressure you want. It comes with 3 optional nozzles to create different views, each with its own unique design.
COMPACT BUT POWERFUL--The fountain pump’s compact design is easy to hide & disguise, 25W super efficiency motor continually lift water column. Reasonable long power cord is heavy duty and easy to installation. The pump has 4 strong rubber suction cups at the bottom of the fountain pump helps keep in your fish tank.
EASY TO USE--The fountain pump's manual disassembly designed shell allow you clean the pump input port and filter/impeller easily. And simply plug in power for quick water draining.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
Icemaster 100 Glycol Chiller with Stainless Bulkheads via MoreBeer
More Info
From the product description, check product page for current description, price and availability:
The Icemaster is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our Glycol Pump Kits. Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don’t have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one Icemaster and four Glycol Pump Kits (GLY355).
Compatability
The Icemaster can be used with any fermenter that has a built in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters.
Ss Brewtech Fermenters and Briteswith optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package – Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
SpeidelTanks with Optional Cooling Jackets – You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters – Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for eash fermenter
Blichmann Fermenators with Optional Cooling Coil – You will need one Glycol Pump Kit for each Fermenator.
It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75 degree ambient and neoprene insulation. Neoprene does not provide much in the way insulation so you would obtain better results using Armaflex or a higher R rating insulation. If only controlling fermentation temps the capacity would be higher. Four Glycol Pump Kits (GLY355) is the maximum that will fit in the Icemaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the Icemaster right now has the capacity to use 5 pumps through the bulkhead fittings.
Cold Crashing capacity at 75F with neoprene insulation (double for fermentation temperature control):
2 – 1BBL (31 Gallon) Tank with neo
3 to 4 – 1/2BBL (15-20 Gallon) Tanks
4+ – 10-14 Gallon Tanks
4+ – 5-7 Gallon Tanks
Save $120!
This is selling for $799.99.
Site Wide Sale: For a short time, MoreBeer is taking 15% off nearly everything, site wide as part of their 12 Deals of Christmas Sale!. There are a few exceptions. This does work with the BrewBuilt Icemaster and saves you $120.
Check sale or product page for current availability & pricing
Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
pinned
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Homasy 400GPH Submersible Pump 25W Fountain Water Pump with 5.9ft Power Cord
More Info
From the product description, check product page for current description, price and availability:
WATER FLOW CONTROL. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400GPH.
STRONG POWER and HIGH LIFT. 25W high efficiency motor for energy saving. Max Lift Height: 6.9ft.(Make sure to connect a water pipe to the smallest nozzle , make sure the joint sealed securely and tightly).
ULTRA QUIET DESIGN with 2 NOZZLES (0.51in and 0.62in). High quality motor provides a quiet environment for you. Threaded fittings make it more stable. The impeller shaft is stainless steel for long life span and corrosion resistance.
SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
WIDE APPLICATION. Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc. Backed by professional after-sale service within 24hrs
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
What are Other’s Saying? Search this product’s Amazon reviews for “beer” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
FREESEA 300-1100 GPH Submersible Water Pump for Pond, Aquarium, Hydroponics, Fish Tank Fountain
More Info
From the product description, check product page for current description, price and availability:
★Samrt control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.）
★With bottom suction trainer,100% submersible.
★Maximum flow rate: 1100 GPH STRONG POWER and HIGH LIFT. Max Lift Height: 11 ft. 100W high efficiency motor for energy saving.
★Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Icemaster 100 Glycol Chiller with Stainless Bulkheads via MoreBeer
More Info
From the product description, check product page for current description, price and availability:
The Icemaster is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our Glycol Pump Kits. Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don’t have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one Icemaster and four Glycol Pump Kits (GLY355).
Compatability
The Icemaster can be used with any fermenter that has a built in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters.
Ss Brewtech Fermenters and Briteswith optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package – Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
SpeidelTanks with Optional Cooling Jackets – You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters – Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for eash fermenter
Blichmann Fermenators with Optional Cooling Coil – You will need one Glycol Pump Kit for each Fermenator.
It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75 degree ambient and neoprene insulation. Neoprene does not provide much in the way insulation so you would obtain better results using Armaflex or a higher R rating insulation. If only controlling fermentation temps the capacity would be higher. Four Glycol Pump Kits (GLY355) is the maximum that will fit in the Icemaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the Icemaster right now has the capacity to use 5 pumps through the bulkhead fittings.
Cold Crashing capacity at 75F with neoprene insulation (double for fermentation temperature control):
2 – 1BBL (31 Gallon) Tank with neo
3 to 4 – 1/2BBL (15-20 Gallon) Tanks
4+ – 10-14 Gallon Tanks
4+ – 5-7 Gallon Tanks
As of this posting, MoreBeer has this for $799.99. Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
Save 15%! For a short time, MoreBeer is taking 15% off nearly everything, site wide when you use coupon code BC15. There are a few exceptions. Shipping is also free to most US addresses with a qualifying $59 order. 15% Off at MoreBeer! – remember promo code BC15. This saves you a whopping $120 and makes the Icemaster 100 just $679.99 and free shipping is still in play.
Check sale or product page for current availability & pricing
pinned
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Icemaster 100 Glycol Chiller with Stainless Bulkheads via MoreBeer
More Info
From the product description, check product page for current description, price and availability:
The Icemaster is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our Glycol Pump Kits. Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don’t have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one Icemaster and four Glycol Pump Kits (GLY355).
Compatability
The Icemaster can be used with any fermenter that has a built in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters.
Ss Brewtech Fermenters and Briteswith optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package – Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
SpeidelTanks with Optional Cooling Jackets – You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters – Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for eash fermenter
Blichmann Fermenators with Optional Cooling Coil – You will need one Glycol Pump Kit for each Fermenator.
It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75 degree ambient and neoprene insulation. Neoprene does not provide much in the way insulation so you would obtain better results using Armaflex or a higher R rating insulation. If only controlling fermentation temps the capacity would be higher. Four Glycol Pump Kits (GLY355) is the maximum that will fit in the Icemaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the Icemaster right now has the capacity to use 5 pumps through the bulkhead fittings.
Cold Crashing capacity at 75F with neoprene insulation (double for fermentation temperature control):
2 – 1BBL (31 Gallon) Tank with neo
3 to 4 – 1/2BBL (15-20 Gallon) Tanks
4+ – 10-14 Gallon Tanks
4+ – 5-7 Gallon Tanks
Black Friday! MoreBeer’s Black Friday Sale is live! They are discounting over 150 products by up to 50%. They are also doing some special limited availability Daily Deals. Shipping for most items will be free, with a $59 order to addresses in the contiguous US and their Free Shipping Program. This is included in the mix and marked down to $749.99.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
