Fermwrap Fermentation Heat Wrap… $16 at Brew Hardware + Use it to Help Remove Stubborn Keg Labels
FERMENTATION HEAT WRAP HEATER from Brew Hardware
More InfoFrom the product description, check product page for current description, price and availability:
This simple heating wrap has a lot of surface area for nice even heat around any carboy or bucket. Wrap it around and secure with either tape or a large rubberband/bungie cord. This unit does NOT have a built in thermostat so you will need to use a controller of some sort such as the STC-1000, Johnson A419, or the new Inkbird controller that we offer.
The picture shows it in its installed position, carboy not included.
- This is selling for just $16.
- Availability is a real issue with this. Typically when it’s available, it sells out quickly.
- As of this posting, it’s back in stock! Check the product page to see if you can still get in on this.
- Is it out of stock again? We keeping a close eye on this. Connect with HBF to stay in the loop! We’ll let you know when it’s available again.
Alternate Use Tip
I use a similar heat mat to help remove stubborn keg labels. See: Removing Keg Labels… A Trick That Makes it Easy! – a section of our keg rebuild how-to
Related: Maintaining Fermentation Temps in Colder Weather
pinnedThis post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdealsInkbird ITC-308 Digital Temperature Controller| Review
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:bhfermwrap