Hands on Review: Used Ball Lock Kegs from MoreBeer
Hands on Review: Used Ball Lock Kegs from MoreBeer
MoreBeer’s Ball Lock Kegs Explained
MoreBeer has a bunch of ball lock keg options both new an used. Most of those are self explanatory, but the used offerings can be a bit confusing.
- Used Cornelius Keg – Ball Lock 5 gal. KEG430 – these are raw kegs – no cleaning, no rebuild, sold “as is” < This is the keg that’s being reviewed in this post
- Rebuilt Used Corny Keg – Ball Lock 5 gal. KEG420 – cleaned and checked in house. Gaskets are replaced as needed. Pressure checked and guaranteed to hold pressure.
- Used Corny Keg Ball Lock 5 gal. – Pressure Tested KEG423 – these are cleaned, sanitized, de-labeled and refurbished by a third party service. Pressure checked and guaranteed to hold pressure.
- Corny Keg – 5 Gallon Ball Lock Keg KEG415 – Brand new Kegland brand ball lock keg
- New Corny Keg – Ball Lock 5 gal. KEG418 – Brand new AEB keg – made in Italy
- Torpedo Kegs – MoreBeer’s own line of ball lock kegs available in a variety of sizes and configurations. See: Hands on Review: Torpedo 10 Gallon Ball Lock Homebrew Kegs
A look at the keg. It looks quite good. Dirty, stickers still on it, but overall it’s in really good condition.Top down view
Rebuild It!
The keg offering featured in this review is the same keg featured in our step by step keg rebuilding and reconditioning how-to.
Should I buy a New Keg or a Used Keg?
Used kegs are generally sourced from soda bottlers. They are built with commercial use in mind and designed to last for many years of rough duty service.
Brand new ball locks may not be made to the same standards. However… We also don’t generally put our kegs through the same abuse that a soda distributor would.
Not withstanding price. I think both options are valid. If you’re up for a little elbow grease and replacing a few parts, used may be the way to go, if you’re more interested in convenience brand new is a good choice. Practically, at least as of this posting, I think price will cause many to go the used route.
Commercial ball lock kegs are usually used by Pepsi distributors. Hey, look what we have here. This hold Pepsi pre-mix. Side note… Pin lock kegs are usually used by Coke Distributors. See: Ball Lock vs Pin LockA look at the gas in post. This has a 6 point post. Lots more about posts and points in our Craftsman Deep Well Socket ReviewSide view of the post. The little notches at the base are an indicator that this is a gas post.If you zoom in, you can see that this is a Spartanburg Challenger VI. If you’re looking to get specific replacement parts for your keg, this is how you do it. Look for the manufacturer and model imprint on the keg. That will allow you look up the specific posts and poppets. O-rings are the same for all standard kegs. See: Bulk Keg Orings and Keg Repair Part Numbers. Cornelius/Corny is kind of like “Kleenex”. It is a specific manufacturer that’s name has become synonymous with the category. When you get a Corny Keg, it could be from a number of manufacturers. Note that this photo also shows a dent. That’s as bad is gets on this particular keg. If you buy a used keg, expect dings and dents. Again… these are tough tanks, they were built for regular commercial use.You can see that the PRV has been vented. This keg came under pressure… a lot of pressure. It took several seconds to vent. Kegs arriving under pressure is a great sign. It means the keg is leak free.If you look at the top of the lid o-ring, you can see that it’s really grimy. No surprise, this is a raw keg. Plan on cleaning, sanitizing and replacing all orings when you buy a used/non-rebuilt keg. See: Bulk Keg Orings and Keg Repair Part NumbersA look at the underside of the lidA look inside the kegAnother look inside the keg. Hey… it’s Pepsi! This does have residual soda in it, but looks great.
Conclusions
This keg was in great shape. It held pressure and had only one small ding. It does need thoroughly cleaned along with a new set of o-rings. Obviously, used kegs are a bit hard to review. Yours will be different. This is a look at one example keg, MoreBeer’s cheapest option KEG430.
One great thing about kegs at MoreBeer is that they fall under MoreBeer’s $59 free shipping program. Many shops exclude kegs from free or flat rate shipping programs. That’s a big bonus.
Availability of these kegs varies. Check links below for current availability, description and pricing.
- Used Cornelius Keg – Ball Lock 5 gal. KEG430 – these are raw kegs – no cleaning, no rebuild, sold “as is”
- Rebuilt Used Corny Keg – Ball Lock 5 gal. KEG420 – cleaned and checked in house. Gaskets are replaced as needed. Pressure checked. Pressure checked and guaranteed to hold pressure.
- Used Corny Keg Ball Lock 5 gal. – Pressure Tested KEG423 – these are cleaned, de-labeled and refurbished by a third party service. Pressure checked and guaranteed to hold pressure.
- Corny Keg – 5 Gallon Ball Lock Keg KEG415 – Brand new Kegland brand ball lock keg
- New Corny Keg – Ball Lock 5 gal. KEG418 – Brand new AEB keg – made in Italy
- Torpedo Kegs – MoreBeer’s own line of ball lock kegs available in a variety of sizes and configurations. See: Hands on Review: Torpedo 10 Gallon Ball Lock Homebrew Kegs
Should I buy a New Keg or a Used Keg?
Used kegs are generally sourced from soda bottlers. They are built with commercial use in mind and designed to last for many years of rough duty service.
Brand new ball locks may not be made to the same standards. However… We also don’t generally put our kegs through the same abuse that a soda distributor would.
Not withstanding price. I think both options are valid. If you’re up for a little elbow grease and replacing a few parts, used may be the way to go, if you’re more interested in convenience brand new is a good choice. Practically, at least as of this posting, I think price will cause many to go the used route.
Rebuild Your Used Kegs
Keg Deals!
Everything For Your Kegerator!
More Keg Reviews!
Food Grade Keg O-rings in Bulk!
More Homebrew Finds!
- Last 50 Finds!
- Top Deals – a curated list of the best deals
- Homebrew Reviews – one of the largest libraries of homebrew reviews in existence!
- Our Top Posts – tips, how-tos, resources posts and more
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdealsAlso: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources!
Check our our Top Draft Related Resources
- Commentary: Pin Lock Keg Pricing and Availability
- Check Your CO2 Regulator for Leaks!
- How to get a keg ready for first use? New Keg Cleaning and Prep
- Portable Draft Beer Serving Options!
- Pin Lock Keg Pricing and Availability
- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Parts Reference
Special Thanks to MoreBeer for providing the unit used for evaluation in this review.
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. review:b3blkeg tag:tpr