Etekcity Non-Contact IR Thermometer [Yeast Starters, Rehydration Water & More]
Infrared Non-Contact Thermometer by Etekcity
More InfoHighlighted Features
- Wide Temperature Range: Measure an upgraded temperature range from -58°–1130°F / -50°–610°C and get your result in 500 ms; The display will also show the max temperature of the surface you’re measuring. Perfect heat gun for measuring
- Professional EMS Mode: The Lasergrip 1080 Infrared Thermometer has an emissivity range of 0.1–1.0 for precise readings across different surfaces and conditions; Adjust the emissivity by pressing and holding the Up and down buttons on the heat gun
- Non-Contact: 12:1 D:S, the Lasergrip can accurately measure targets from a distance like industrial settings, making it safer to measure dangerous objects; For the best accuracy, the distance of measurement should be approximately 14.17 in.
- Additional Functions: The Lasergrip has a backlit LCD screen with a unit conversion feature (°F/°C); It has an auto-off feature to extend battery life and a low battery indicator, so you will not accidentally run out of battery life.
- Versatile Design: Infrared technology allows you to measure the surface temperatures of various objects with temperatures above the boiling point and below the freezing point; Use it for cooking, ovens, A/C, refrigerators, soapmaking, pets’ beds, etc.
- Do Not Use on Humans: The Lasergrip is intended for use on inanimate objects only. Measuring the temperature of a human or animal is unsafe
- Storage Instructions: Store your Lasergrip in a ventilated or airtight environment at low temperature. AVOID direct sunlight or direct source of heat, otherwise there is a high risk of the product surface being sticky
Measures in C and F. Built in laser for precise aiming. Auto shut off and hold functions. Low battery indicator and backlit LCD display.
Since this is no touch, you can check the temp of yeast washing and yeast rehydration water and your starter wort without the risk of infection. I find mine particularly useful for rehydrating yeast.
Infrared thermometers should not be considered a direct replacement for a conventional thermometer. A quality IR thermometer will give you a close approximation of surface temperatures. Note that steam seems to throw off readings. Uses include: Contained yeast rehydration water, chilled wort or starter temperature, kegerator, fermenter or fermentation area and beer tasting samples. If you’re looking for a great conventional thermometer consider Thermapen ONE – Hands on Review
Etekcity Infrared Thermometer 1080, Heat Temperature Temp Gun for Cooking, Laser IR Surface Tool for Pizza Oven, Meat, Griddle, Grill, HVAC, Engine, Accessories, -58°F to 1130°F, Yellow – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned amazon