Hands on Review: Kegtron Smart Keg Monitor
This review is by Homebrew Finds Contributor Brad Probert. Brad is an engineer, expert homebrewer and experienced reviewer. Grab a link to Brad’s website at the end of this review.
Kegtron Smart Keg Monitor
Let’s face it, some homebrew gear is purely a luxury item. You’ll hear people ask, “Yeah, but how does that make your beer better?” Sometimes you can rationalize your flashy gear because it allows your brew process to be more repeatable, or take less time. Kegtron doesn’t make your beer taste better, it doesn’t improve your brew process, and it doesn’t make your brew day faster. But it’s something more than just brewery bling.
When I first saw the Kegtron keg monitor, it seemed just like a silly way to part homebrewers from their money. It looked cool, but it definitely didn’t seem like something I’d get excited about. And then I tried it.
Kegtron sells 2 models. One for a single tap, one for a dual. The measurement is done by some fancy digital flow meters inside the housing of the unit. There is a circuit board that keeps track of how much beer goes through the flow meters and stores that data on the board. It also has a Bluetooth transmitter that broadcasts this information to an app on your phone/tablet that you’ve paired through the app.
Since the flow meters just keep track of how much beer goes past them, you have to enter into the app how much beer you start with. You hook up your keg, tell it how many gallons are in it, and it tracks from there, deducting beers each time it measures 12 ounces has gone by. It’s customizable, so if you want to count beers by the pint (U.S. or Imperial) instead of 12 oz. bottle, you can do that. The display on the app tells you how many “drinks” are left in the keg. And since you also input to the app what size your keg is (2.5 gallon, 5 gallon, 1/2 barrel, etc.), along with telling you how many beers are left, it has a colorful graphic to show what percentage of your keg is left.
In the app, you can name each of your beers, so if you have more than one Kegtron tap being monitored, they all show up on your screen and you can keep track of each beer with its own space on your display. Since the data is stored on the Kegtron unit itself, and it uses Bluetooth to communicate to your app, if you leave the house and get out of Bluetooth range, you don’t see your beer lists. So it’s intended to be a display at home next to your kegerator, or on your phone so you can direct your underlings to run downstairs and fetch you what you want from the comfort of your couch.
Check Current Prices & Availability:
- Kegtron at Valuebrew – periodically offers freebie with purchase
- Kegtron at Great Fermentations
- Kegtron Smart Keg Monitoraffiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link, multiple versions available
When comparing prices, consider total price at checkout
Hands on Review
Kegtron provided me a single-tap unit to try out and review at home. I saw it on display at Homebrew Con in Portland, displaying a club’s list of taps and their various stages of keg emptiness. I wasn’t sure that in a less busy setting it would provide the same value. What I found was it got me excited about what I had on tap (like I needed help). It was cool watching it accurately count down the drinks with each glass filled. I have a 4-tap keezer, and I found myself gravitating to whatever I had on the tap with the Kegtron just because it was fun. After a couple weeks I found myself wanting it on all of my taps. It was just so cool, and suddenly seemingly useful to know exactly how much beer was left in each tap. I was a convert.
Kegtron sitting inside keezer
The Kegtron unit isn’t too big, but you do have to plan where you’re going to put it. You need to have the majority of your beer line between the Kegtron and your tap, and a shorter length between the keg and Kegtron. The manual also has some simple graphics showing you acceptable orientations of the unit. These two configuration items are important to prevent beer foaming and proper measurement, so you need to plan for these. For me, I placed the unit flat on the stepped-up section inside my keezer that generally goes unutilized anyway. It needs to be plugged in to operate, so you have to run this wire out to plug it in. For me, I just laid it across the top of the keezer collar and the lid seal handled this fine.]
App Screenshot with Multiple Taps – when using a multi-tap version
I was up and running in a matter of minutes. I cut my beer line in two and pushed the lines on over the barbed fittings on the Kegtron unit. It came with two small worm clamps to secure the lines, so that was easy. And with the power cord running out across the lid seal, I was good to go. Connection in the app was super simple and worked flawlessly. The app was easily and intuitively navigateable to pick a couple settings and input my beer volume. Those 10 minutes of set-up were the only time I spent fiddling with the hardware. It just worked. No leaks, no glitchy app function, no dispensing problems. The unit does slow down flow a bit (went from ~8 second glass fill to ~10 seconds), but it did not cause crazy foam like I was concerned about. There was maybe a tiny amount of additional foam, but nothing to complain about.
Over the couple weeks of trialing this, I had zero errors. I finished off my first keg and had no issues with the resulting sputtering of foam from a kicked keg. I hooked up the next keg, entered the new volume and name, and I was in business again. Cleaning is simple, as you just follow your same line cleaning process/products. The parts in contact with the beer are made of PVC-free “barrier” plastic so it doesn’t absorb beer residue like standard beer lines.
Conclusions
The Kegtron worked flawlessly. That’s exactly how you want these homebrew gadgets to work, but isn’t always the case. And you might think it’s unnecessary brewery bling, but I can tell you from personal experience that once you start having the information at your fingertips of how full your kegs are, you don’t want to go back to your less enlightened days.
Check Current Prices & Availability:
- Kegtron at Valuebrew – periodically offers freebie with purchase
- Kegtron at Great Fermentations
- Kegtron Smart Keg Monitoraffiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link, multiple versions available
When comparing prices, consider total price at checkout
More Photos
App screenshot from Brad’s trialA close up look at the Kegtron’s beer line connectionsPower cord draped over keezer lid
Special Thanks to Kegtron for providing the unit used for evaluation in this review.
By Brad Probert. Check out Brad’s website – beersnobby.com
Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources!
Check our our Top Draft Related Resources- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Step by Step: Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Portable Draft Beer Serving Options!
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Repair Part Numbers
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdealsKeg Deals!
kegdealsMore Homebrew Finds!
- Last 50 Finds!
- Top Deals – a curated list of the best deals
- Homebrew Reviews – one of the largest libraries of homebrew reviews in existence!
- Our Top Posts – tips, how-tos, resources posts and more
- Let’s be Friends!
Recent Deals!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. review:kegtron tag:tpr