Higher Wattage Gear? Inkbird ITC-608T 1,800 Watt Dual Stage Temp Controller
Inkbird ITC-608T Temperature Controller
More InfoHighlighted Features
- US ETL Certificate Listed: ITC-608T thermostat temperature and humidity controller is ETL listed, stable, and safety
- This temperature and humidity controller works for grow tents, growing mushrooms, home brewing, fermentation, Greenhouse, reptile terrariums
- The temperature and humidity controller Max loading 120 Volt 15 Amps 1800 Watts; Temp range from minus 40 to 212 Fahrenheit degrees; humidity range from 5 to 99% RH
- The temperature and humidity controller Supports calibration; Centigrade or Fahrenheit reading; Sets compressor delay to protect your cooling device; Automatically saves the setting parameters
- When plugging the temp and humidity probe: WORK1 outlet for a heating or cooling device; WORK2 outlet for a humidifier or a dehumidifier; Automatically ON or OFF
- When plugging a temp probe only: WORK1 outlet for a heating device, and WORK2 outlet for a cooling device; Automatically ON or OFF to maintain the temp in a preset range
- When plugging a humidity probe only: WORK1 outlet for a humidifier, and WORK2 outlet for a dehumidifier; Automatically ON or OFF to maintain the humidity in a preset range
Dual stage temperature controller with 1,800 watt rating. I would say that 1,800 watt is a higher capacity than many of the homebrew controllers out there.
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
Also Consider: Hands on Review: ITC-308 Temperature Controller
Inkbird ITC-308 Digital Temperature Controller| Review
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned amazon