Intertap 4″ Stainless Steel Beer Shank + back nut, plastic collar, hex nut, and a 1/4″ barb – $24.99 + free ship eligible, limited availability

Intertap Beer Shank (Stainless Steel) - 4 in. D1247

Intertap Beer Shank (Stainless Steel) – 4 in. from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Comes with a back nut, plastic collar, hex nut, and a 1/4″ barb. Requires a 1″ hole saw for installation. When set in place, the shank will only have about 2 1/8″ of length to pass through your wall or fridge door, due to the length of the collar and back nut.

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Dimensions:

5 1/8″ Total Length
4″ Length Without Barb
2 1/8″ Length Between Collar and Back Nut

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $24.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Intertap Beer Shank (Stainless Steel) – 4 in. D1247

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Leave a Reply