From the product description, check product page for current description, price and availability:

This is a re-conditioned 5 gallon ball lock, soda keg.  They are sometimes called “corny kegs” because of the manufacturer, Cornelius, but they can be made by several manufactures including Firestone, AEB, and others.  These kegs have been cleaned and pressure tested using the following process:

• Rinsed out with water on the inside and sprayed on the outside.
• Soaked in a hot “Brew Clean” solution for about an hour with poppet valves depressed to fill dip tubes with cleaning solution. Then re-rinsed.
• The keg is then pressurized and soap tested for leaks, then left for several days and re-tested for pressure before shipping.
• If you keg has a “sweet” smell when you open it this is normal.  This smell comes from the residual “Brew Clean” cleaner, NOT from soda. Just rinse the keg and sanitize again before kegging.

These kegs ship under our flat rate shipping (some of our competitors exclude kegs from free or reduced flat rate shipping programs).

These kegs come with their original O-rings AND a new set of O-rings at no additional charge (some competitors charge up to $3.99 for this new set of O-rings)  This O-ring set includes Lid O-ring, two post O-rings and two dip-tube O-rings.

Please remember that these are used kegs.  They will have dings, dents, stickers on the outside and could have some permanent staining that will not effect your beer.  The tops and bottoms may have black material coming off that will leave black marks on your hands or other areas. This is due to sun exposure and is very common in used kegs. If you want a perfect keg we sell new kegs as well.

Again – these are used kegs and are returnable but you will pay the shipping to return them.

From the product description, check product page for current description, price and availability:

This is a re-conditioned 5 Gallon Pin Lock, Soda Keg (Coke style). This keg has been cleaned and soaked in a hot “Brew Clean” solution, re-rinsed, lubed and re-pressurized to check the seals. The kegs are in good shape, but could have small dings, dents or scratches. The lid features a gasket seal and a static pressure release valve. These will not effect the function of the kegs. Many have stickers on the outside. They might be of either Cornelius, Firestone (also called Spartenburg) or Italian construction. All types of kegs are manufactured to the same specifications and are of the same quality. The lids and O-rings are interchangeable. We fully guarantee your satisfaction with the kegs you purchase.

***FREE O-RING PROMOTION: 1 LID, 2 POST AND 2 DIPTUBE O-RINGS FREE WITH YOUR ORDER!***

From the product description, check product page for current description, price and availability:

Are you seeking crystal-clear beer right from the tap? Introducing the FLOTit 2.0 Floating Dip Tube, your solution for filtering out hop particles before they enter your beer lines. This device features a compact stainless steel float, measuring just 1½ inches in diameter!

Setting up the FLOTit 2.0 is quick and easy: simply detach the beer post from your ball lock keg, remove the existing long dip tube, and replace it with the shorter tube provided. Next, connect the silicone tubing to the tube’s underside. Submerge the entire setup in the keg and trim the tubing to allow the float to sit at the keg’s bottom.

The package comes complete with a 22-inch silicone tube, a dip tube adapter, a 304-grade stainless steel float equipped with a stainless mesh filter, and additional replacement seal gaskets for the mesh filter.

• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Step by Step: Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Portable Draft Beer Serving Options!
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Repair Part Numbers