Kegerator Tubing – Barbed vs Flare Fittings – what should you use?
Pictured: Four way CO2 Manifold via William’s Brewing
I think that the general consensus among homebrewers and home kegerator builders is that… MFL/Flare/Swivel connections are superior to barbed connections. That’s just my read on the situation, no scientific basis for that statement. After all, MFL swivel thingies look cool, they’re easy to attach and you can take tubing on and off easily and. The total solution, including swivels also generally costs more… more expensive = more better… right?
My take on the matter…
For gas lines: Personally, I prefer barb fittings on CO2 lines as they don’t loosen over time. Use a quality clamp and you have a solid connection that should not loosen or leak over time. Moving kegs and lines around could conceivably loosen MFL connections and a CO2 leak is invisible. Even a small, slow leak could equal an emptied CO2 tank.
For liquid lines: A liquid leak is a lot more obvious. A little dripping from a liquid MFL line would tell you that the line has loosened. I generally use flare swivels on liquid lines. I do still use barbs on tail pieces because that’s kind of a tight spot on my kegerator that makes it difficult to turn a wrench.
Of course you can use whatever you want. If you use MFL, I suggest periodically tightening swivels to make sure you always have a good, solid connection.
You May Be Interested In:
- Deals on Swivels – 1/4” Swivel Flare Nut x 1/4” Barb Fittings
- Manifolds at William’s Brewing
- Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands on Review: Keg King Kegerators! – Designed for Homebrewers
- Upgrade Your Kegerator – 6 Improvements
Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources!
Check our our Top Draft Related Resources- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Step by Step: Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Portable Draft Beer Serving Options!
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Repair Part Numbers
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdealstoppost:flarevsbarb