Mark II Keg and Carboy Washer Mod – Adding a Stainless Steel CIP Spray Ball
Updated: September 3, 2024
I’m a big fan of the Mark II Keg and Carboy Washer. I use mine for lots of things including… kegs, carboys, Speidel Fermenters, buckets, tubing, draft lines [See: Mark II Keg & Carboy Cleaner… As a Recirculating Draft Line Cleaning Pump] and more. See: Hands on Review: Mark’s Keg and Carboy Washer for a comprehensive look at this great homebrewing tool.
A while back I became aware of a Stainless CIP Spray Ball (1/2″ size) via a reader tip. Thanks to HBF Reader Sam for the original heads up on these and HBF Reader (Let’s be friends!) Chris.for the idea to use in conjunction with the Mark II Keg and Carboy Cleaner!
Find a CIP Spray Ball!
Note: The Spray Ball I used in this post has since changed specifications.
- Search Amazon for “1/2″ stainless steel cip spray ball” to shop around for available options
- ProFlow Dynamics
- Brewers Hardware
CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move. Since they’re too large to move you… clean them in place. If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.
This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!
I gave this a try on my Keg and Carboy Washer and I was really pleased with the results.
This is a heavy well made CIP spray ball assemblyA look at the lower portion It reads 1/2″ and SS304A look at the openings on the spray head. Note that the top portion rotates using liquid pressure.This threads nicely onto the top of the PVC tube on the Mark II Keg and Carboy Washer. Replacing the end cap that contains one spray hole. In the background, My ITC-308 Temp Controller.This fitting makes the total height a little higher compared to the standard tip. Note that, depending on the size opening of your carboy, this may not fit. Look back for an update to this post that has more dimension information so you can determine if this will work with vessel’s with smaller openings. Here’s MoreBeer’s 6 gallon PET Carboy on the cleaner. You can see there’s still plenty of clearance.A picture of the spray ball in action
A video of the spray action
Find a CIP Spray Ball!
Note: The Spray Ball I used in this post has since changed specifications.
- Search Amazon for “1/2″ stainless steel cip spray ball” to shop around for available options
- ProFlow Dynamics
- Brewers Hardware
Mark’s Keg & Carboy Washer can be found at…
- MoreBeer
- Mark II Keg and Carboy Washer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
- Mark’s Keg Washer Keg & Carboy Washer, Mark II by Mark’s Keg Washer affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
- Adventures in Homebrewing
- Austin Homebrew Supply
- Search Amazon for “mark keg and carboy washer” – offerings vary
- Search eBay for “mark keg and carboy washer” – offerings vary
- Great Fermentations
Review & Mods
- Hands on Review: Mark’s Keg and Carboy Washer
- Mark II Keg & Carboy Cleaner… As a Recirculating Draft Line Cleaning Pump!
- Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer!
Related Resources & Gear
- Build a Recirculating Draft Line Cleaning Pump
- National Chemical Keg Beer Line Cleaner for Kegerators 32 oz Bottle
- LLC – Liquid Line Cleaner via MoreBeer
- Search Amazon for “Star San”
- Search Amazon for “PBW”
- Search GFCI Adapter on Amazon
- Building a Simple Draft Line Flushing Setup
- Recirculating Draft Line Cleaning Build v1
- Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Keg Deals!
Star San Tips & Tricks!
Rebuild Your Kegs!
Mark’s Keg & Carboy Washer Review!
Convert it to a Keg Line Cleaner!
Replacement Pump
Rebuild Your Kegs!
PBW Tips & Tricks!
Star San Tips!
More Homebrew Finds!
- Last 50 Finds!
- Top Deals – a curated list of the best deals
- Homebrew Reviews – one of the largest libraries of homebrew reviews in existence!
- Our Top Posts – tips, how-tos, resources posts and more
- Let’s be Friends!
Recent Deals!
10 Most Recent Homebrew Resource Posts & How-To’s!
We are Homebrew Review HQ! Our 10 Most Recent Reviews
Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources!
Check our our Top Draft Related Resources- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Step by Step: Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Portable Draft Beer Serving Options!
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Repair Part Numbers
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdeals
This is a Top Post! See: All Top Posts
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. tag:lnksfxd – toppost:markiisprayballmod tag:tpr
Hi,
Do you know if the thread are BSP or NPT ?
Thanks !
Pretty sure it’s NPT.
While it works great in carboys, it does not seem to work as well with my FastFermenters. The couple of times I have tried it, it got the bottom of the fermenter really clean, but the top didn’t seem to get as clean. I am going to mess around with it some more and see what happens.
Will this fit through a stand glass carboy opening?
It’s going to depend on the carboy, but I believe the general answer is no, it doesn’t fit most glass carboys.
What’s size do we need from the amazon store? 1/2″?
Yep
What’s the actual outside diameter of the spray ball? I’d like to know the diameter of a carboy neck required to accept the ball as I have some vintage glass carboys, some with slightly narrower necks (size 6 stoppers)
That’s a great question Mark. I’ll measure that and get back to you.
How about normal glass carboys? Does it fit in them?
I’ve heard some sizes do not fit, but I’m not sure which sizes. If it’s too long for your fermenter, getting a shorter threaded pvc pipe should resolve that problem.
Worth noting it won’t fit in glass carboys, but works great for everything else
Just an FYI that this thing is powerful enough (without the CIP though) to clean out my 50 gallon (not a typo) FlexTank Dexter tanks in my meadery. I basically just take the sprayer only and put it through an upside down milk crate and balance the fermenter on the crate with the washer going inside. It is able to clean all the gunk off my fermenters using PBW and then moving to the next sink with Saniclean (a Starsan alternative from the same makers that doesn’t foam up as much). I have video of it in action if anyone wants to see….quite amazing to me.
So this fits right in to the existing top connection on the Mark II Keg and Carboy Washer? No other parts needed? Do you feel as if the spray action is better/do you think it will clean better on a dirty fermenter?
Yep, it fits right on top no additional parts needed. I do feel like it’s a better spray action. I would never suggest putting a completely dirty fermenter on this or the standard nozzle. I cleaned a 10 gallon corny keg fermenter using this last night and sprayed it out well first so that yeast and trub didn’t muck everything up.
Nice! Thank you. Great tip!