From the product description, check product page for current description, price and availability:

This Homebrew Kegging System Includes:

– TapRite T-Handle Dual Gauge Regulator

– Two Used 5 Gallon Ball Lock Corny Kegs

– Double Gas line assembly with MFL fittings, Fifteen (15) feet of Thick Wall Gas Line (details below)

– Pressure Relief Valves

– Two Picnic Tap assemblies with MFL disconnects

This gas line set up assumes you keep the Co2 Tank outside of your kegerator and run the line inside to a “T” connector:

-6 feet of line to connect the regulator to a “T” connector

-6 feet of line & gas disconnect for the first keg (long so you can bring the keg outside of the fridge to shake/force carbonate)

-3 feet of line and gas disconnect for the second keg

This system should be run at 6 PSI.

The gauge guard is a great way to protect your regulator and highly recommended here at AIH, please see our options!

Our CO2 tanks speak for themselves. If you can rent one locally, go for it. If not…we have some darn good prices!

Full Set of instructions is now available online to save paper:
Homebrew Kegging System Ball Lock(PDF)

We know some homebrewers are more picky than others, so please keep in mind that these are USED kegs. Some of these kegs are probably 30 years old. Do not expect new kegs. If you are looking for new kegs, please check out our new kegs. We try and have quality kegs available at all times. With this said, they are going to show normal wear and tear. We are not implying that our kegs are not quality…we just want to avoid any misunderstandings.

If you are unhappy with your used 5 Gallon Cornelius Kegs for any reason, we will gladly take them back. The purchaser will be responsible for return shipping charges.

• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Step by Step: Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Portable Draft Beer Serving Options!
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Repair Part Numbers