
FermWrap Fermentation Heater – $18.99! Limited Availability, BEATS 2014 Deal! + Use it to remove keg labels
FermWrap Fermentation Heater from MoreBeer
More InfoFrom the product description, check product page for current description, price and availability:
Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution (11″ tall x 25″ wide.). Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20 degrees Fahrenheit. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested). To decrease the temperature differential, stick only a portion of the FermWrap to the fermenter.
With 40 watts of heat spread over almost two square feet it provides gentle even heating. Draws 40 watts. 115V.
For more precise results, we recommend a temp controller and carboy thermowell for the ultimate in fermentation temperature control. Or for the best control, use the dual stage control and carboy thermowell, as well as a refrigerator, to control both the high and low temps.
Limited Availability Deal of the Day: As of this posting, this is marked down to $18.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.
Product Description – Here – Use coupon code BEERDEAL to get this discount.
From the “prices on everything continue to skyrocket” department. We’ve featured this as a deal of the day over 10 times dating back to 2014. It has almost always been offered at $23.95 to $23.99. This actually BEATS a deal of the day that was offered in August of 2014. At that time it was offered for $23.95.
Deal valid 3/17/25 only while supplies last
Alternate Use Idea…
I use a similar heat mat to help remove stubborn keg labels. See: Removing Keg Labels… A Trick That Makes it Easy! – a section of our keg rebuild how-to
Related: Maintaining Fermentation Temps in Colder Weather
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Inkbird ITC-308 Digital Temperature Controller| Review
pinnedThis post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
morebeer