Digital Temp Controller, 1,800 Watt

Diymore 1800W Digital Temperature Controller Plug in Thermostat Outlet Digital Thermostat Heating Cooling Mode Timer Socket15A /120V Heating Cooling Control -104℉~210℉ for Greenhouse Incubator

Diymore 1800W Digital Temperature Controller Plug in Thermostat Outlet Digital Thermostat

More Info
Highlighted Features
  • 【5 Temperature Controller Modes】 F01 cycle timer mode; F02 countdown ON mode, F03 countdown OFF mode, F04 countdown ON and countdown OFF mode). Temperature calibration support. Reset function. Data storage function to save all set parameters after power off.
  • 【thermostat Outlet Plug ForHeater Timing Settings】 This temperature controlled outlet socket has cycle timing and countdown functions. You can select cycle timer mode to control the unit to operate in cycles, or select countdown modes to turn the unit on or off. Setting range: 0~99 hours 59 minutes. Please note that the thermostat plug function and the time function cannot be used at the same time.
  • 【Precise Digital Temperature Controller】Thermostat outlet:-104℉~210℉;plug in thermostat function with ±1% accuracy. Set the start and stop temperature to make the heater or cooler operate as programmed.
  • 【Temp Controller Other Features】 HD LED display with backlight, very convenient to operate in the dark, 2M cable can meet most plug in thermostat needs.
  • 【Reptile Thermostat Wide Range of Applications】 This thermostat socket with probe is widely used for glass house, greenhouse,incubator,terrarium, refrigerators, fermentations, heating mat and other temperature controlled systems.

 

Use to control your compatible kegerator or fermentation chamber.

Single stage temperature controller with 1,800 watt rating. Controls a heating or a cooling device. I would say that 1,800 watt is a higher capacity than many of the homebrew controllers out there.

A couple things I really like about this controller… It features a direct plug in instead of an extension cord style plugin. I think that’s a tidier setup in a lot of cases. Second it features start and stop temperatures. Normally temp controllers have a set point and an offset. The controller attempts to keep things close to the set point within the constraints of the offset. So, let’s say it’s 68 degrees with a 2 degree offset. That works just fine but it’s more confusing than.. start at this temperature, stop at this temperature.

Diymore 1800W Digital Temperature Controller Plug in Thermostat Outlet Digital Thermostat Heating Cooling Mode Timer Socket15A /120V Heating Cooling Control -104℉~210℉ for Greenhouse Incubator  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: Hands on Review: ITC-308 Temperature Controller

adamztop5

Inkbird ITC-308 Digital Temperature Controller| Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Variable Speed Food Grade Pump… $19.99

Food Grade Water Pump Speed Control with 13ft Silicon Tube Pipe Low Noise Diaphragm Pump 2L 0.53gal/minute Self Priming Fresh Water Flow Transfer DC Pump Ice Maker Coffee Machine Water Cooling

Food Grade Water Pump Speed Control with 13ft Silicon Tube Pipe Low Noise Diaphragm Pump 2L 0.53gal/minute Self Priming Fresh Water Flow Transfer DC Pump Ice Maker Coffee Machine Water Cooling

More Info


Highlighted Features
  • Come with a power adapter from 100~240V AC to DC12V, Pump Rated Voltage:DC12V, Max. 2L 0.53 gal /minute, and own speed controller at adapter,.
  • Pump with self-priming function: Max. Vertical Suction Lift: 6.5ft(2m). Max. Flow: 0.53GPM(2LPM), Head(High Lift):≥16ft (5m).
  • Inlet and Outlet: Come with 13ft/4M silicon tube, inner dia.6mm, outside dia.8mm. The pump head and silicon tube is made of Food Grade materials, it can be used for Max.100℃ water.
  • The water pump is not suitable for long periods of continuous work, which can damage the working life of the pump. It needs to work for a period of time and then rest for a period of time. The regular working life of a water pump is 500-800 hours.
  • Low noise, easy installation, stable performance. Appropriate for liquid circulation, transfer etc. DO NOT Pump Flammable/Corrosive/High Viscous/Muddy Liquids! There is no built-in pressure switch. If the pump is working, the outlet of the pump cannot be blocked! This pump is NOT a submersible pump, please do not put the whole pump into the liquid.

 

11/1 11 AM Central: This is selling for just $19.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly.  Check product page for current info – More About Prices

Food Grade Water Pump Speed Control with 13ft Silicon Tube Pipe Low Noise Diaphragm Pump 2L 0.53gal/minute Self Priming Fresh Water Flow Transfer DC Pump Ice Maker Coffee Machine Water Cooling – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

1/2″ Tri-Clamp to Ball Lock

Clamp to Ball Lock Post 1.5in Liquid Lock Post Tri Clamp to Ball Connector Beer Brewing Accessory Brewer Fitting

Clamp to Ball Lock Post 1.5in Liquid Lock Post Tri Clamp to Ball Connector Beer Brewing Accessory Brewer Fitting

More Info

From the product description, check product page for current description, price and availability:

  • Free welding plate allows you to add TC ports to any container without soldering.
  • Foodgrade leakingproof silicone gasket for good sealing, healthy and stable to use.
  • 1.5 inch triple clamp to ball lock post, 1.5 inch TC flange can be used to almost any container.
  • Liquid post for home beer brewing, professionally manufactured, can be used to replace the old or worn one.
  • Manufactured from premium 304 stainless steel material, perfect surface finish, durable and sturdy.

 

1.5in Liquid Lock Post Tri Clamp to Ball Connector Beer Brewing Accessory Brewer Fitting – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ends Today: Kegland Fermentation Heating Wrap Blanket – 39″ Long! – on sale for $28.99 at William’s Brewing

Fermentation Heating Wrap Blanket

Fermentation Heating Wrap Blanket

via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

Perfect heating solution for those who want even coverage and certainty that their PET fermenter will not melt even if the fermenter is empty. Features Velcro straps to hold the blanket firmly in place. Ultra low density 30 watt element is spread out along the entire length and width of the heating belt, preventing hot spots and providing even low density heat.

Using 30 watts, this heating wrap belt is great when paired with insulation and a thermostat like our item P40 RAPT Temperature Controller or item Q91 KegLand MKII Dual Plug Control. Plugs into any 110 volt outlet. Fits all KegLand Fermzilla models, as well as carboys and plastic bucket style fermenters.

39″ long, 9¾” tall.


 

Measures… 39″ long, 9¾” tall.


Fermentation Heating Wrap Blanket

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Inkbird WiFi Four Probe Thermometer – bbq, homebrew & more

Inkbird WiFi Grill Meat Thermometer IBBQ-4T with 4 Colored Probes, Wireless Barbecue Meat Thermometer with Calibration, Timer, High and Low Temperature Alarm for Smoker, Oven, Kitchen, Drum

Inkbird IBBQ-4T, Rechargeable Wireless Thermometer with 4 Probes, Calibration, Timer, High and Low Alarm

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • 2.4G WiFi Wireless Control & Temperature Range: Inkbird WiFi Meat Thermometer is required to connect 2.4GHZ, download INKBIRD App achieves wireless control, supporting check temperature whether at work or in the grocery. The short time measurement: 32 ℉ to 572 ℉, continuous monitoring: 32 ℉ to 482 ℉. NOTICE: The MAX TEMPERATURE FOR IBBQ-4T COVER: 176 °F/80 ℃.
  • Rechargeable & App Notification: Implanting a 2000mAh lithium battery in Inkbird bbq thermometer can last at least 26Hours, which will help to save money on purchasing replace batteries. Mobile notifications make this grill thermometer more intelligent, when the customized temperature is reached, both the App and device will alarm simultaneously to avoid overtime cooking. At the same time, the App provides whole cooking temperature data to analysis.
  • Customized High/Low Alarm & Timer: IBBQ-4T WiFi smoker thermometer supports to customize high & low alarm, accurately measure the temperature of the oven,grill or pallet and timely remind you to add fuel. Inkbird meat probe thermometer with the built-in timer,no more complex instructions,just set up and used. Very convenient and gives more time to enjoy with family and friends.
  • Powerful Magnets & Identify Color Probes: Inkbird digital grill thermometer with a strong magnet on the back,place it on any metal surface directly,such as Pitboss,Zgrill Masterbuilt smokers,ovens,refrigerators etc,make it easy to store, also easier to find it during the next cooking! Simultaneously monitoring temperatures in up to 4 different foods or the ambient temperature of your smoker/oven/grill, the unique design of probes with different colors avoids confusion.
  • Data Storage App & Calibration: Multipurpose INKBIRD APP supports temperature graph & chart features,no need to worry about losing the data while cooking, allowing you to check previous cooking temperature records whenever you apply, helping improve every detail through analysis of data. Additionally, this wireless grill thermometer could be calibrated as well, which could keep the high precision after a long period of using.

 

Use for homebrewing, bbq-ing, around the kitchen and more. Do you BBQ?  If so, check out my BBQ site… BBQ Finds

What are Other’s Saying?   Search this product’s Amazon reviews for “brew” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Inkbird WiFi Grill Meat Thermometer IBBQ-4T with 4 Colored Probes, Wireless Barbecue Meat Thermometer with Calibration, Timer, High and Low Temperature Alarm for Smoker, Oven, Kitchen, Drum – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Complete Ball Lock Tap Assembly [serve your beer on the go] – on sale for… $23.99

Stainless Steel Stem Beer Keg Tap Self-Closing Beer Tap Faucet Ball Lock Tap Polished Chrome-Plated Brass Beer Faucet Ball Lock Faucet with Ball Lock Quick Disconnect Picnic Corny Keg Tap

Stainless Steel Stem Beer Keg Tap Self-Closing Beer Tap Faucet Ball Lock Tap Polished Chrome-Plated Brass Beer Faucet Ball Lock Faucet with Ball Lock Quick Disconnect Picnic Corny Keg Tap

More Info


Highlighted Features
  • Newly Upgraded Self-Closing Corny Keg Tap: This picnic tap comes with a stainless steel spring that fits between the beer faucet and the faucet adapter, allowing the draft beer keg tap to automatically close after opening. Avoid inadvertent touches that cause the picnic faucet to open, resulting in beer waste and mess
  • Smooth Faucet Interior Finish for Less Foaming: The polished inner wall reduces beer rubbing inside the beer tap faucet, reducing beer foaming. This awesome beer faucet with ball lock disconnect is the perfect replacement for that annoying plastic picnic tap
  • Healthy and Durable Material: Food safe stainless steel beer faucet core ensures no rust and corrosion resistance. The high-quality brass body is rugged and durable. Five layer chrome is polished in the outer layer, and not easy to fall off. Exquisite appearance and will not affect the beverage flavor
  • Tight Connection for Leak-free: The draft beer faucet has a wear-resistant rubber gasket that creates a tight seal to avoid leaks. The attached beer faucet wrench can be used to tighten the beer faucet adapter during installation, ensuring tight connections and leak-free
  • Easy to Clean: Simple structure, easy to disassemble for cleaning after use. The ball lock picnic tap includes a tap brush and rubber beer tap cover. Plug brush could remove sediment and keep the original taste of beer. The faucet cover keeps dirt from entering the keg tap

Includes faucet, adapter, ball lock qd and accessories. Does not include pictured keg.

10/31 3 PM Central: This combo is on sale for just $23.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying orderPrices and availability can change quickly.  Check product page for current info – More About Prices

Hilangsan Stainless Steel Stem Beer Keg Tap Self-Closing Beer Tap Faucet Ball Lock Tap Polished Chrome-Plated Brass Beer Faucet Ball Lock Faucet with Ball Lock Quick Disconnect Picnic Corny Keg Tap – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Great for Tailgating!.. Ball Lock Mini CO2 Gas Regulator 0 to 60 PSI – $21.49, best price + Portable Serving Resource Post

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit

Mini CO2 Regulator

More Info


Highlighted Features
  • New version gets rid of bad performance: compared to other brand single-stage keg charger, this mini keg charger regulator will buffer and stabilize the pressure transferring speed to prevent the gauge damage caused by sudden high pressure, the pressure holding performance can be comparable to the dual-stage mini keg charger! compared to traditional keg charger without pressure gauge and adjustment knob, this mini regulator allows you to read pressure clearly and set a suitable carbonated value.
  • Anti-damage design and pressure adjustment knob safety design: there is a built-in metal thread ring in the mini co2 regulator bottom to prevent the bottom from being worn and damaged by the installation turning. there is a pressure adjustment knob on the top of the mini keg regulator, you can decrease pressure value by turning the pressure adjustment knob towards DECREASE direction during working process to keep user and gauge safe.
  • No leaks and quality material: the ball lock tip is designed with a sealing o-ring to guarantee a tight connection between ball lock and brass connector, which will avoid the gas leaks effectively. we also provide a spare ball lock tip white sealing washer for replacement. this mini keg charger is made of anodised aluminium, not easy to get rusted, smooth body is easy to wipe out to clean.
  • A useful lever wrench for installation: mini keg co2 regulator is easy to install for using. install a small co2 bottle to the regulator bottom first, fix the brass connector to the regulator by using and turning lever wrench clockwise secondly, then connect the gas ball lock to the co2 regulator and attach this keg charger kit to your beer keg, set your carbonated pressure by pressure adjustment knob finally. turning the adjustment knob towards INCREASE means that you are turning on keg charge
  • Portable and perfect for being used at various activities: this mini and compact mini keg regulator is compatible with 16g cartridge, can be applied to 2L, 3.6L, 5L beer growler keg, allows you to dispense beer, cold brew coffee, soda water, iced tea on barbecue, beach, lake, holiday parties, and other outdoor events. no need to take the large system co2 tank, this light and small beer carbonation equipment lets you enjoy tasty drinking anytime and anywhere.

 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

As of this update these are selling for just $21.49. That’s the best historical third party Amazon price I found, notwithstanding Lightning Deals or coupons. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly Check product page for current info – More About Prices

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B09NJN3Q9K:ptr

Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller

Updated: November 8, 2024

Inkbird’s ITC-308 Digital Dual Stage Temperature Controller is a dual stage, pre-wired Digital Temperature Controller

The ITC-308 comes in the original version as well as an updated Wi-Fi enabled model.  This review covers both editions of this controller.

Why a Temp Controller?

Temperature controllers, sometimes referred to as over-riding thermostats, can control devices like refrigerators, freezers and fermentation heating devices to provide a consistent temperature for your kegerator, fermentation chamber or brew system. They do this by monitoring the temperature and cycling on and off the device in question. Generally, you will set the device to full cooling or heating power and the temperature controller takes over from there.


Check Prices, Current Specs & Availability, Review Continues Below:

Alternate Listings:

Different listings or combos for the ITC-308 may be available – search Amazon for “Inkbird Digital Temperature Controller”  – to see what variations may be available

Canada:

At MoreBeer:


Our ITC-308 Deal Pages:

These pages show our most recent deals for these great controllers

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller


Dual vs Single Stage

Dual stage means that the ITC-308 can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.  Dual Display shows both measured and set temperature.

Hands on Review Inkbird’s ITC-308 Temp Controller

Continue reading

Single Handle RECONDITIONED Ball Lock Kegs for… $44.95

5 Gallon Ball Lock Keg – Single Handle – Reconditioned

Reconditioned 5 Gallon Ball Lock Keg – Single Handle

Here’s an awesome value in a reconditioned 5 gallon ball lock keg. If you’re a bit of a rebel but still reliable as a watch, these kegs are a perfect match.

This baby sits right in the middle of our used keg condition scale; the sweet middle ground between looks and budget. Yeah, this reconditioned 5 gallon keg has “experience” in beverage use, but it’s reconditioned it to be ready for more years of faithful service. It’s love at first keg, without all the investment.

How’s that?  Like we said—the happy middle for happy homebrew, cold brew and nitro coffee, tea, Kombucha, soda, and whatever you’re drinking this week.

Reconditioned Single Handle 5 Gallon Keg Features:

  • Stainless steel body
  • Manual pressure relief built into the lid
  • Manufactured single handle
  • Reconditioned – cleaned, sanitized, de-labeled and pressure-checked before shipping
  • We install new O-rings as necessary during pressure testing
  • Keg is a true ball lock, not a converted pin lock (like some other recon kegs)
  • Great for homebrew beer, soda, and tea, as well as nitro coffee and cold brew coffee

Keg Specifications

  • Keg body of 304 stainless steel
  • Approved by the NSF
  • 8.5″ diameter x 25″ height. Dimensions may vary slightly from wear.

 

As of this posting Beverage Elements has these for just $44.95. Shipping is an additional calculated cost. No coupon code necessary, check product page to see if this deal is still available.

5 Gallon Ball Lock Keg – Single Handle – Reconditioned

Related: Beverage Elements Sale Items

Our Double Handle Kegs for LESS

These are typically more expensive than single/strap handle kegs…

 

Reconditioned 5 Gallon Ball Lock Keg with Dual Handles

5 Gallon Reconditioned Ball Lock Keg – Dual Handle

Our 5 gallon reconditioned ball lock keg, both new and fully reconditioned, are far and away our most popular kegs — and for good reason. Reconditioned kegs are a great way to get the capacity and quality of a true brewer’s keg when you’re just getting started with in-home brewing: you can craft your very own beer, soda, Kombucha tea, cold brew coffee, nitro coffee and more, all at a great, affordable price.

But used kegs are leaky, sticky, and completely beat, right? Not at Beverage Elements. All our used kegs have been reconditioned right here, in house: we clean, sanitize, de-label, and pressure-check each and every one. Even though your reconditioned keg might not be brand new, you’ll never know it. Check out a few of the features and benefits you’ll be getting with this reconditioned ball lock keg.

(Class 1) Keg Features

  • Cleaned, sanitized, de-labeled and pressure-checked
  • Manual pressure relief built into the lid for easy depressurization
  • Durable stainless steel body and dual rubber handles
  • O-rings replaced during pressure check if necessary. Pro Tip: keep a spare set on hand at all times, since O-rings sometimes crack in transit and during keg cleaning
  • True ball lock keg — not converted pin lock
  • Great for homebrew beer, soda, Kombucha tea, nitro coffee, and cold brew coffee

Keg Specifications

  • Keg body of 304 stainless steel
  • Approved by the NSF
  • 8.5″ diameter x 25″ height — dimensions may vary slightly from wear

This is a Class 1 reconditioned ball lock keg. That’s the best condition of our reconditioned kegs — however, it is still used. It may have some scratches, dents, and other signs of use


 

As of this posting Beverage Elements has these for just $39.95. That’s an outstanding deal! For some pricing clarity, we featured these kegs back in March of 2017. At that time they were MORE. $49.90 each and you had to buy a two pack to get that price.

Reconditioned 5 Gallon Ball Lock Keg with Dual Handles

keg deals

kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Low Stock… Food Grade EPDM Keg LID O-Rings

Keg Lid O-Rings - FDA Rated EPDM

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Choose from silicone, buna-n and even EPDM.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and Custom Color Coded Post O-rings – available in two colors schemes, gray & black (matches QD colors) and blue & green (blue for beer, green for gas),

EPDM for Homebrewers!

Valuebrew has announced the availability of bulk EPDM o-rings for homebrewers.  EPDM is a favorite of many pro brewers for certain applications. Until now, these have not been available to homebrewers, or at least easily available. EPDM has some real advantages over silicone. One of the big ones is a much lower permeability. That means they seal better and since they’re less porous they are more resistant to absorbing off-smells and off-flavors.

They are FDA Rated for food use and NSF61 certified. As of this posting, post, dip tube, lid and internal QD options are available in 10, 25 and 50 count options. Valuebrew has struggled mightily with availability and they’ve already made some indications of potential issues with new EPDM offerings. In particular, the lid o-ring description says they received a small shipment.

Valuebrew has struggled with availability on some of their options.  This has been particularly true of their keg lid o-rings. As of this update stock is showing low for EPDM lid.

EPDM Keg Lid O-Rings

All Lid O-Ring Options at Valuebrew

Complete Lineup; Food Safe Keg O-Rings

Related: Keg O-Ring Materials Selection

Reader Feedback!

Thanks to John for the feedback via Facebook!  Connect with HBF on Facebook & More

Continue reading

Mangrove Jack’s Hard Apple Cider Recipe 6 Gallon Kit

mangrove jack's hard apple cider kit

Mangrove Jack’s Hard Apple Cider Recipe Kit, 6 gallon

More Info

From the product description, check product page for current description, price and availability:

The taste of delicious orchard apples, light and crisp with a juicy apple bite. Enjoy anytime, chilled or on ice. Each of our cider varieties has been formulated with only the freshest and best quality fruit which is then pressed and concentrated using our state of the art evaporators, and then cold filled into a pouch. All this effort we go to ensures we preserve the natural flavor of the fruit, giving you cider which is fresh, crisp and especially good on a hot summer’s day. Included in the pouch is the juice concentrate, sweetener, flavoring, Mangrove Jacks M02 Cider Yeast and full instructions. Needed but not included: water and sugar.


 

Mangrove Jack’s Hard Apple Cider Recipe Kit, 6 gallon – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

More Info

Highlighted Features
  • Convenient Design: Plug and play, easy to use; Support Celsius or Fahrenheit reading
  • Dual Relay Output: Support to connect with refrigeration and heating equipment at the same time
  • Dual Display Windows: You can view the measured temperature and set temperature at the same time
  • High and low-temperature: Buzzer alarms when the temperature reaches preset temps
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: It comes with temperature calibration and compressor delay which can protect your refrigeration

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

Use to control fermentation or kegerator temperatures. This is a great controller. Check out my Hands on Review

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

TWO x 5 Tier Shelving Units [Brewing Storage & Organization]

Topeakmart Garage Shelves 5 Tier Adjustable Metal Shelving Unit Utility Shelves Garage Storage Racks for Warehouse Garage Pantry Kitchen- Silver, 35.5 x 12 x 71 Inch, 2Pcs

Topeakmart Garage Shelves 5 Tier Adjustable Metal Shelving Unit Utility Shelves Garage Storage Racks for Warehouse Garage Pantry Kitchen- Silver, 35.5 x 12 x 71 Inch, 2Pcs

More Info


Highlighted Features
  • Adjustable Height: This shelf has five tiers, and you will get 2 pieces of shelves in total. The height of each level can be adjusted to meet your different needs. The frames can be adjusted to a small distance to place small items, or you can remove the divider to form an ample space for big items
  • Anti-toppling Unit: An anti-tipping unit is provided to fix this storage shelf to the wall for extra stability. Please do not forget to install this unit after you assemble the shelf
  • Anti-rust& Anti-scratch: The galvanized surface of the display rack features smooth edges, which makes the shelf soft enough to prevent scratches. There are durable plastic feet for added stability on the bottom to prevent the floor from being scratched and damaged
  • Boltless Design for Easy Assemble: The storage racks are easy to build, and all necessary mountings and instructions are accompanied. A rubber mallet is recommended for assembly. (A rubber mallet is not included; include a pair of gloves for your convenience)
  • Multiple Uses: Each of this 5-tier storage rack includes 16pcs plastic feet. So, you can build it as a shelving unit or horizontally as an extended workbench. The good frames are versatile for the basement, storage, workshop, shop, home, bedroom, living room, kitchen, etc

 

Use to store and organize items around your home brewery and more.

Topeakmart Garage Shelves 5 Tier Adjustable Metal Shelving Unit Utility Shelves Garage Storage Racks for Warehouse Garage Pantry Kitchen- Silver, 35.5 x 12 x 71 Inch, 2Pcs – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Amazon’s Best Sellers in Food Service Storage Rack Shelves

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Weigh Gram Digital Milligram Scale – 50 grams x .001 grams! + Calibration Weight, Case & Accessories – Water Salts & Hops

Milligram Scale, 50g/0.001g High Precision Mg Scale, Jewelry Scale with Tare, 6 Unit Powder Scale, Digital Miligram Scale for Powder Medicine, Gem, Micro Gram Scale, Reloading Scale Gold

Milligram Scale, 50g/0.001g High Precision Mg Scale, Jewelry Scale with Tare, 6 Unit Powder Scale, Digital Miligram Scale for Powder Medicine, Gem, Micro Gram Scale, Reloading Scale Gold

More Info


Highlighted Features
  • Digital milligram scale are equipped with high precision sensors, with a maximum capacity of 50g and reads the weight in 0.001 increments, Can easily switch between 6 available modes (g-oz-ozt-dwt-ct-gn) according different weighing needs
  • Tare & Calibration: Tare button on the mg scale automatically subtracts the weight of the container, making it easy to get a accurate net weight of powder or jewelry. Included 20g calibration weight, makes it easy to recalibrate your micro scale without buying extra weights
  • Portable Scale & Flip Cover :The mini digital pocket scale is compact and lightweight, like a cell phone size, which can be easily carried around. And quality ABS flip cover design to protect the weighing pan and measure sensors from bumps and rubs
  • LCD Screen & Indicator : The powder scale with a backlit LCD screen which gives you to read the numbers clearly in the dark. And the gem scale smart indicator could remind you low battery power, overload and unstable position. Auto-off function works after 180 seconds of inactivity to save power
  • Pocket Scale You Use the Weigh Gram scale to measure a versatile range of objects. Such as; Gold, Silver, Coins, Jewelry, Gems and other fine powder

 

Tare Function: Tare allows you to subtract the weight of the container you’re using to get a true weight of the contents.  Add your empty container to the scale and press the tare button.  This zeros out the scale.  Now add the thing you’re weighing and the scale displays just the weight of the contents of your container.  In my opinion the tare function is essential for any good homebrewing scale.

With resolution down to the thousandth of a gram, this would be a candidate for use with both hops and water salts.

Typically as resolution/accuracy go up, capacity goes down. From what I generally see the 50 gram (1.76 ounces) capacity is a relatively high considering that this has milligram resolution.

Milligram Scale, 50g/0.001g High Precision Mg Scale, Jewelry Scale with Tare, 6 Unit Powder Scale, Digital Miligram Scale for Powder Medicine, Gem, Micro Gram Scale, Reloading Scale Gold – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

More Info


Highlighted Features
  • Convenient Design: Plug and play, easy to use; Support Celsius or Fahrenheit reading
  • Dual Relay Output: Support to connect with refrigeration and heating equipment at the same time
  • Dual Display Windows: You can view the measured temperature and set temperature at the same time
  • High and low-temperature: Buzzer alarms when the temperature reaches preset temps
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: It comes with temperature calibration and compressor delay which can protect your refrigeration

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

Use to control fermentation or kegerator temperatures. This is a great controller. Check out my Hands on Review

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

INKBIRD Smart Bluetooth Two Stage Temperature Controller

INKBIRD Smart Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Homebrew Breeding Fermenter 10A/1200W

INKBIRD Smart Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Homebrew Breeding Fermenter 10A/1200W

More Info


Highlighted Features
  • 【App Remote Control via Bluetooth 5.0】This temperature controller has Bluetooth 5.0 that allows you to remotely control it through the INKBIRD app within 100 meters (328 feet).
  • 【Personalized mode settings】You can set up to 12 periodic temperature ranges in a day using time mode. Two temperature ranges can be set in day/night mode. When in temperature mode, simply set the start and stop temperatures to run automatically.
  • 【Reliable and Trustworthy with More Functions】This Bluetooth temperature controller features high and low temperature alarms, refrigeration delay protection, and temperature calibration.
  • 【Waterproof Probe & Maximum Power Output】The included temperature probe is IP67 waterproof and can accurately measure temperatures, temperature range: -40℉~212℉. Max power output: 1200W, which is shared between two different outlets.
  • 【No Need to Store Data In the Cloud】To prevent losing data, the ITC-312 device can store offline data for 30 days and transfer it to the INKBIRD app after connecting via Bluetooth. Moreover, the INKBIRD app can store 1 year temper data.
  • 【Wide Application Range】The ITC-312 Thermostat is useful for a range of temperature control needs including home living, heating, cultivation, seedling growing, and wooden sheds.

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

INKBIRD Smart Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Homebrew Breeding Fermenter 10A/1200W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

More Info


Highlighted Features
  • WIFI smart controller: Supports both IOS and Android; WIFI connection supports 2.4 GHz Wi-Fi with INKBIRD APP to control the temperature remotely
  • Dual Relay Outputs: the controller will turn on/off refrigeration and heating equipment as conditions change
  • High and Low-Temperature Alarm: The controller will alarm when the temperature reaches the preset temperatures or the sensor experiences a malfunction
  • Convenient Design: Plug-n-play, easy to use; support Celsius or Fahrenheit reading, as well as temperature calibration
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: Supports temperature calibration and compressor delay which can protect your refrigeration

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

In my opinion the original ITC-308 was and is a game changer as far as homebrew temp controllers.  In comparison to available controllers available at the time the ITC-308 was released, it offered loads more features, including dual stage control, for a fraction of the price.  Game changer!  The addition of Wi-Fi control and monitoring to this great controller has made a great temp controller even better.  Check out our Hands on Review of the ITC-308.  That includes a section on the WiFi version.

Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Updated: 5/3/2024


Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B07PVBG8K1:ptr

Today Only: Beer Process Poster – Water + Malt + Hops + Water = Beer – on sale for $9.04

beer process poster

As of this posting coupon code ZHALLOWEEN25 takes 25% off this poster making it just $9.04.

Beer Making Cycle Diagram Poster

Deal is valid 11/1/2024 only



adamztop5

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

2 x Digital Waterproof Refrigerator/Freezer Thermometers w/Min&Max (Monitor Kegerator and Fermentation Temps)

Digital Frigerator Thermometer 2 Pack, Thermometer Refrigerator with Large LCD Screen, Stand and Magnetic Back, for Room,Kitchen-Black

2 x Digital LCD Thermometers with min and max temps.

More Info


Highlighted Features
  • WIDE RANGE HIGH PRECISION: Temperature measurement range : -20℃~50℃ (-4℉~122℉), accuracy value: ±1℃,resolution:0.1℃. The refrigerator thermometer also has the function of recording the max/min temperature, which can help you accurately capture the change of the max/min temperature of the refrigerator over a period of time, helping you to understand the performance of the refrigerator and ensure that all the food is at the ideal storage temperature
  • LARGE SCREEN,EASIER READING: The digital refrigerator thermometer is equipped with a large high-definition screen with clear numbers, you can easily read the current temperature information of your refrigerator
  • WATERPROOF & SAFETY: Refrigerator thermometer is made of environmentally friendly waterproof material with IPx3 waterproof construction, which can work perfectly in harsh environments such as wet, cold or hot greenhouses. You don't have to worry about damaging the parts due to water immersion during long-term use. Safer and more durable
  • COMPACT & PORTABLE, FLEXIBLE PLACEMENT: The refrigerator thermometer with magnetic multi-angle bracket can meet the needs of different usage scenarios, it can be attached to the back of the refrigerator or freezer, or can be placed hanging with the bracket; And the design of the refrigerator thermometer is exquisite and compact, which won't take up too much space. It is also very suitable for car refrigerator
  • EASY TO OPERATE & VERSATILE: Digital refrigerator thermometer has only three buttons, on/off, ℃/℉ switch, one button to clear the temperature difference, no other operation, convenient for the elderly and children to use. The refrigerator thermometer is applicable to many scenes, it can be used in kitchen, room, car refrigerator, pharmacy freezer, bakery, winery, camping, it is ideal for refrigerator, freezer, indoor and outdoor thermometer

 

Possible uses include monitoring kegerator temperatures, beer fridge temperatures and fermentation chamber/area temperatures.

FAHZON Digital Frigerator Thermometer 2 Pack, Thermometer Refrigerator with Large LCD Screen, Stand and Magnetic Back, for Room,Kitchen-Black – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


NODE™ Wi-Fi Temperature MonitorAlso Consider: NODE™ Wi-Fi Temperature Monitor

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

GLASS Spray Bottles, 2 Pack + Star San Tips & Tricks

LiBa Amber Glass Spray Bottles 2 Pack, 16 oz Refillable Empty Spray Bottle for Cleaning, Essential Oils, Hair, Plants, Adjustable Nozzle for Squirt and Mist, Bleach/Vinegar/Rubbing Alcohol Safe

LiBa Amber Glass Spray Bottles 2 Pack

More Info


Highlighted Features
  • HEALTHY, HAPPY HOME- LiBa's premium 2 pack amber glass spray bottles offer UV protection and are equipped with an adjustable spay nozzle, making them the perfect solution to all of your DIY needs. Ingredients like bleach, baking soda, vinegar, and sensitive essential oils will remain at top quality. Create your favorite natural cleaning solutions, hair treatments, window, floor, carpet , and kitchen cleaners, air fresheners, pet, ironing and linen spray and much much more!
  • INGREDIENT PROTECTION- Our glass bottles are manufactured with premium grade dark amber glass to ensure ingredient purity and quality by protecting against degradation from ultraviolet light. Light sensitive ingredients like essential oils will remain stable and can be mixed and stored without having to worry about deteriorating the therapeutic or aromatic properties of your mixture.
  • SAVE OUR PLANET- Designed with reusability and quality top of mind. A superior green alternative compared to conventional plastic spray bottles that often contain harmful and polluting chemicals, you can help save the planet and your wallet by reusing these containers again and again! BPA-fre
  • CUSTOMIZE YOUR CLEAN- Adjustable spray nozzle allows for 3 different modes- off, full mist, and a targeted jet spray. More choices means you can customize your experience to cater to your every need! The extended suction tube allows you to get every last drop so that you can spend less time refilling, and more time on the things that matter.


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Also: Star San Tips & Tricks – includes Spray Bottle Method of Sanitizing

LiBa Amber Glass Spray Bottles 2 Pack, 16 oz Refillable Empty Spray Bottle for Cleaning, Essential Oils, Hair, Plants, Adjustable Nozzle for Squirt and Mist, Bleach/Vinegar/Rubbing Alcohol Safe – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Search “Star San” on Amazon

Regular Replacement:

I recommend regularly replacing non-glass bottles used to store acidic solutions like Star San.

Five Star Chemicals says that you should not soak items in Star San solution for extended periods of time. Even chemical resistant bottles are not impervious to damage caused by extended exposure to acid. Glass and stainless are exceptions. I can’t tell you an exact time frame, but personally, I’m now aiming to replace spray bottles every six months. See: Star San Tips and Tricks


starsanofferings

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon