The BlowTie is a pretty amazing Spunding Valve solution.  Check out my Hands on Review

A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.

Here are the parts you need to put it together:

• BlowTie Diaphragm Spunding Valve FE960
• Duotight Push-In Fitting – 8 mm (5/16 in.) Tee DUO109
• Duotight Push-In Fitting – 8 mm (5/16 in.) x 1/4 in. Flare DUO106
• 2 small sections of 8 mm OD EVABarrier Tubing – EVABarrier Double Wall Draft Tubing – 5 mm ID x 8 mm OD (12 m) D1718C

Check out the complete lineup: DuoTight Push In Fittings & EVABarrier Double Wall Draft Tubing at MoreBeer!

Homebrew Finds is Spunding Central!

• Build a Spunding Valve! – How and Why << a top resource on the subject

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!