6.9 Cu Ft Deep Freeze @ Home Depot + Tips & Gear for Your Kegerator
6.9 Cubic Ft Deep Freeze from Home Depot. You could use this to put together a Kegerator [See: Kegerator Tips & Gear] or a temp controlled fermentation chamber.
Also: Inkbird Dual Stage Temp Controller
Magic Chef 6.9 Cubic Ft Freezer (model HMCF7W2) from Home Depot marked down to $158 as a Special Buy. In store pickup at your local Home Depot is free. Includes storage basket.
Magic Chef 6.9 cu. ft. Chest Freezer in White – $168 + Free In Store Pickup
Check sale or product page for current availability & pricing
Related: Yeast Starters & Fermentation | Kegerator Tips & Gear | Resource Page: Chest Freezer Deals | Inkbird Temperature Controller Deals and Reviews!
Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources!
Check our our Top Draft Related Resources- Commentary: Pin Lock Keg Pricing and Availability
- Check Your CO2 Regulator for Leaks!
- How to get a keg ready for first use? New Keg Cleaning and Prep
- Portable Draft Beer Serving Options!
- Pin Lock Keg Pricing and Availability
- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Parts Reference
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdealsInkbird ITC-308 Digital Temperature Controller| Review
prod:hdmc69freezer
does any know if a Danyo 1/2 BBL keg dispenser work for fermenting a 6 gallon car boy? Trying to kill two birds with one stone.
Anybody try this with a Speidel 7 gal?
If you remove the plastic from the door, it fits 2 ball lock cornies plus a 5 lb co2 tank on the compressor bump.
To remove the door plastic:
Remove top plastic (2 screws under little covers)
Remove 3 screws on top hinge and remove door
Remove door gasket, it just pulls off
Cut around the whole door, leaving the channel that the gasket is held by
Pry the plastic away and tear it off
Trim any uneven foam
I have not yet cut holes in the top, but it’s foam under the plastic top cover, so you should be able to dig to find the coolant lines. I’ll try to report back.
Anyone know if two cornies fit in this?
I’m wondering the same thing about fitting two cornies. Guess I’ll find out in a couple days. Found this though:
http://i.imgur.com/bBDKS2C.jpg
I bought one as well – can’t wait to try it out!
I can let you know when mine comes in. It’ll almost certainly require modifications.
Does anyone have internal specs on this? Want to know how much space the compressor takes up before I try to fit a 6.5g carboy in there.
Just got this last weekend. It seems like a great deal. It will easily hold two 3 gallon better bottles for fermentation. It also holds 5 and 6 gallon bubbler carboys (one at a time). There is a piece on the door that slightly pushes into the 6 gallon carboy but it seemed to close fully. I haven’t tested it with a full carboy though.