Simple Deluxe Submersible Water Pump + Draft Line Cleaning Builds
Simple Deluxe Submersible Water Pump for Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & Inline, Black
More InfoHighlighted Features
- 1 HAS PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, Max flow rate: 290GPH, Max Lift Height 6.3ft
- DURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
- SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18 gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
- 3 THREADED NOZZLES0.51in, 0.62in, 0.75in - Threaded fittings make it more stable. 4 SUCTION CUP at bottom and 6' CORD, so you can stick it on the right side of the aquarium, either vertically or horizontally
- VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems
- This is not a food-grade pump. Do not use in the production of food for human consumption
- Power source type: Electricity
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
Simple Deluxe Submersible Water Pump for Fish Tank, Hydroponics, Aquaponics, Fountains, Ponds, Statuary, Aquariums & Inline, Black – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
Our Line Cleaning Builds:
- Build A Recirculating Draft Line Cleaning Pump
- Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion
- Building a Simple Ball Lock Draft Line Flushing Setup
Also Consider:
Stainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs. Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned amazon