Troubleshooting DuoTight Fitting and EVABarrier Tubing Leaks

Leaks? Troubleshooting EVABarrier/DuoTight Leaks

I’ve done several pressure tests with DuoTight Fittings and EVABarrier Tubing. Each test has proven the tested components were leak free. Having said that, it’s entirely possible that you’ll have a leak. This happens with any tubing system, that’s why we… check for leaks. Some tips…

  • Check for leaks as you would if you were using standard tubing. DuoTights and EVABarrier are amazing… but not magic. They need to be installed correctly and securely throughout your system. Liquid liquids are easy to spot. Gas leaks are a little more difficult.
  • I highly suggest picking up a DuoTight Pressure Gauge. You can easily add this to your setup and use this technique for checking for gas leaks.
  • If you have a section of EVABarrier tubing that’s marred or damaged, cut off a couple inches to get a fresh end.
  • Make sure you’re pushing the EVABarrier Tubing completely in to your DuoTight Fitting.
  • Make sure you’re pulling your EVABarrier Tubing out firmly to engage the sealing mechanism.
  • DuoTight Compatible Locking Clips – I recommend using these on all DuoTight connections. They snap into place pushing the collar out, securely engaging the fitting. They also help prevent bumps and moves from disengaging the connection.
  • If you have a particular fitting that won’t seal… contact the seller or manufacturer to get a replacement. A leaking DuoTight fitting is not normal and I’m guessing your retailer will take care of you. Out of the dozens of fittings I have I’ve had 1 that was non-functional on receipt.

DuoTight Compatible Locking Clips

DuoTight Compatible Locking Clips

Valuebrew’s DuoTight Compatible Locking Clips are a great addition to any DuoTight setup.  These snap into the collar of DuoTight Fittings and lock connections in place. This makes the connection more secure and reduces the chances of leakage.

These are available in both 8mm and 9.5mm sizes

DuoTight Compatible Locking Clips

Sanitizing DuoTight Fittings – Star San & DuoTights?

I’ve gotten some feedback when it comes to DuoTights and Star San.  The materials used in DuoTight fittings – Acetal, EPDM, Stainless – are generally compatible with Star San. However that doesn’t mean that you can soak DuoTights in Star San endlessly.

Star Stan could eventually damage DuoTights (and lots of other things) given excessive exposure. Damaged fittings = potential leaks. Contact time for Star San is five minutes. That’s about how long you should leave a part sitting in Star San.

Related: Star San Tips & Tricks

Our Step by Step on Finding and Fixing Kegerator CO2 Leaks

fix keg co2 leaks

This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!

Buy DuoTight

Related DuoTight Reviews on How-To’s!

DuoTight Reviews, Resource Posts & How-To’s!

DuoTights are so amazing – at least in my book 🙂 – that I have several reviews and related top posts

allduotight

I Recommend These for DuoTight Fittings!

duotightclips

DuoTight Ball Lock QDs!

duotight ball lock quick disconnect review

My DuoTight Review!

duotightreview

This write-up is part of my in Depth DuoTight Review – Jump To This Section

More Homebrew Finds!

Let’s Be Friends!

Subscribe To Our Email! – 8 Ways to Connect with HBF

Quick Catch-Ups

Top Content

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. tag:lnksfxd review:duotight lnksto:duotightreview rp:duotightleaks

6 thoughts on “Troubleshooting DuoTight Fitting and EVABarrier Tubing Leaks”

  1. Greg S.

    Don’t soak Duotight fittings in Star-San. It contains phosphoric acid which eats acetal, one of the plastics from which the fittings are made. Will led to cracks / leaks

    Reply ↓
  2. snoopeppers

    @homebrewfinds (and Richard) I definitely encourage you to take a look here: https://www.homebrewtalk.com/threads/duotight-fittings-disintegrated.703071/

    I found Duotights on homebrewfinds and my wallet wishes I knew about issues with StarSan ahead of time! I’ve had about $30 worth of the things disintegrate and lost two tanks as well. I just replaced them to try again, without StarSan… crossing my fingers it’s not another wasted investment.

    Reply ↓
  3. Richard

    I had 2 different Duo Tight Tee’s come completely apart on one end and lost a cylinder of gas each time. I complained to the seller and Kegland with no result. Not even an offer to replace the 8mm tee’s.

    Reply ↓
    1. admin Post author

      Hmmm, that’s a new one for me, never experienced anything like that. My suggestion would be to reach out to the shop where you purchased the tees. No one is going to replace the gas, but, if this was a manufacturing defect then I would expect that they would replace the tees.

      Reply ↓

Leave a Reply